Planner help
A planner for apartments and houses: floor plan, furniture, electrics, water and heating, finishes and drawings in one project.How to work in the planner: every task step by step, with buttons and keys.
Start hereService featuresAbout the PlannerAbout the Planner
A planner for apartments and houses: floor plan, furniture, electrics, water and heating, finishes and drawings in one project.
Controls: plan, 3D view, walkthrough
The general editor keys work in any tab. The “Controls” card in the lower left corner shows them for the view and tool that are open right now.
Common to the whole editor
My projects
A page with a list of a person's projects: create a project, start from a task, search, star, move to the trash and restore.
Plan
Walls
Walls are built and edited only in the “Plan” tab. In the other tabs the plan is locked: walls, openings, stairs and utilities cannot be selected or moved.
- How to build a wall
- What the square snaps to before the first click
- What the end of a wall snaps to
- How to make a corner and close a room
- How to change a wall
- How to assign a wall a type with layers
- How to lock a wall
- How to look into a room in 3D through the walls
- How to move several walls at once
- How to add a dimension to the plan
- How dimension numbers are read
Doors and windows
Openings are placed and edited only in the “Plan” tab.
Stairs
Stairs are placed and edited only in the “Plan” tab.
Utilities and structures
Risers, vent ducts, radiators, columns and beams belong to the original plan. They are placed and edited in the “Plan” tab; in the other tabs they are locked together with the…
Renovation Stages
A stage answers the question of what happens to an element during renovation: it stays, it is demolished, or it is built. Using stages, the editor shows different views of the…
Selecting multiple items
Labels and Callouts
Rooms
Heights: floor, slab, finished floor, ceiling
Roof
Furnishing: catalog of furniture, appliances and decor
Furniture, appliances, plumbing fixtures and decor are placed and edited in the “Furnishing” tab.
Electrics
The “Electrics” tab: buttons “Outlets”, “Switches”, “Light”, “Wiring”, “Panel”, “Low voltage”. Here you place devices, run cables, assemble groups and the panel, check the lines…
- How to place an outlet, a switch or a light fixture
- How to link a switch to lights
- How to run a cable
- How to fix a cable you've already drawn
- How to route a cable to another floor
- How to build circuits and check the lines
- How auto-routing works
- How to build a panel
- How to print labels for a panel
- How to view the panel diagram
- How to move a device's callout
- How to build the electrical drawings album
- What it is based on
Water and heating
Water supply and drainage
Tab “Water and heating”, buttons “Water supply” and “Drainage”. Here you place outlets for plumbing fixtures, run cold and hot water and drainage pipes, check them by calculation…
Heating, underfloor heating, air conditioning, ventilation
The “Water and heating” tab, the “Radiators”, “Underfloor heating”, “Air conditioning” and “Ventilation” buttons. Here you place devices, run heating pipes, air conditioner lines…
Finishes: floors, walls, ceilings, skirting boards, screed, plaster, insulation
The “Finishes” tab applies finishes in layers, the same way they are done on site: screed, waterproofing, floor covering; plaster and wall finishes in sections by height…
- How the materials panel works
- How to lay a floor covering
- How to set the tile and board layout
- How to finish walls
- How to finish reveals
- How to set a ceiling
- How to install skirting
- How to set a screed
- How to set plaster
- How to set waterproofing and insulation
- How to apply finishes in 3D
- How finishes look in 3D
- How to get the schedule, quantities and check
- How finishes appear on elevations and in the drawing set
- Old projects
Drawings
Wall Elevations
Room Schedule, Opening Schedule, Marks
Drawing Set
Estimate
Project items by section, with prices that you enter.
Landscape
Plot
The plot covers the yard around the house: boundaries, ground coverings, terrain and water in low spots. Buildings, plants, the pool and the garden render are described in…
Buildings, plants and landscaping of the plot
Everything that is placed on the plot as a ready-made 3D model: the house and outbuildings, fence, trees and rocks, fountains, swings, barbecues, garden furniture, lamps. Placed…
Pool
A pool is built as a basin of any shape: an outline, a depth and a rim. It presses the ground down beneath it, and the water in it stands exactly level with the edge. A pond in a…
Garden render
A render turns the plot you have drawn into a picture: photorealistic, a marker sketch, or a watercolor site plan. The picture is drawn by a neural network, and each generation…