How to set plaster
WhereFinishes tab
Steps
- At the top, choose or Ceiling.
- Choose the mix (gypsum or cement), the method (Beacon-levelled or Rule-levelled) and the thickness.
- Walls: click near a wall or in a room. Ceiling: click the room.
Good to know
- If the wall type already has a plaster layer, it is counted automatically and is not counted a second time.
- On a ceiling, a layer thicker than 20 mm is applied over mesh (SP 71, cl. 7.2.7): you will get a warning.
- The beacon spacing is at least 10 cm less than the length of the rule (SP 71, cl. 7.2.10).