How to export the drawing set to PDF

Wherethe Export panelthe Drawing Set row

Steps

  1. Open Export.
  2. At the bottom of the panel, choose the sheet Format (A4 or A3) and the plan Scale. auto takes the largest standard scale at which the plans of all floors fit on the sheet.
  3. Click Drawing Set. A PDF downloads in a few seconds.

What is in the set

SheetWhat is on it
Measurement planHow it was before the work: what will be demolished is still standing, nothing new yet. Only if the project has stages
Demolition planWhat will be demolished is highlighted, with Existing and To demolish in the legend. Only if there are stages
Construction planWhat is new is highlighted, nothing demolished is shown, with Existing and New in the legend. Only if there are stages
Room planThe result of the renovation: room dimensions, room numbers and door and window marks per GOST 21.501
Furniture layout planThe result of the renovation with furniture, as in the Furnishing tab. Furniture from the catalog of blanks is in green-turquoise, with Furniture and equipment in the legend
Roof planTop view: slopes each in its own tone, eave edge, ridges, hip ridges, valleys, slope arrows with the pitch. Only if a roof is set
Room scheduleNumber, name, area, category, floor; living area, summer rooms, total area
Opening scheduleItem, name, size, quantity
Wall elevation layoutFor each floor: a plan with room numbers and names, and for each wall the letter of its elevation and an arrow.
Wall elevationsBy room, as a strip: walls in sequence with openings, furniture in front view, sockets, water outlets, radiators with heights and distances from the corner (the Setting-out pass, see Wall Elevations). A room may take up several sheets: Wall elevations. 1. Kitchen (А–Е) and (Ж–К).

Good to know

  • Dimensions on the plans follow GOST, in millimeters without a unit. More details in the help on walls, in the section on dimension numbers.
  • Each floor has its own set of sheets. A floor without walls is skipped.
  • There is one plan scale for the whole set, and it is written in the title block. If the chosen one does not fit, the Export panel will tell you in advance.
  • Elevations use the room settings from Elevations (1:50 by default). If they do not fit, a smaller scale is taken, and as a last resort the sheet is fitted with the note . On A3 they fit more often.