Heating, underfloor heating, air conditioning, ventilation

The Water and heating tab, the Radiators, Underfloor heating, Air conditioning and Ventilation buttons. Here you place devices, run heating pipes, air conditioner lines and air ducts, check everything with a calculation against the standards, and put the sheets together into an HVAC album. Pipes and air ducts are drawn with the same tool as water supply pipes (Water and drainage, How to run a pipe): the same keys, snapping to devices, going to the neighboring floor.

Tasks in this topic

1. How to place radiators

   WhereWater and heating → Radiators.

2. How to run heating pipes

   WhereRadiators → the Riser, manifold and pipes row, the Medium T1 and Return T2 tiles, or the Pipes T1 and T2 step → Build.

3. How to make underfloor heating

   WhereWater and heating → Underfloor heating.

4. How to install an air conditioner

   WhereWater and heating → Air conditioning.

5. How to set up ventilation

   WhereWater and heating → Ventilation.

6. How to verify with a calculation

   Wherestep Calculation and checks, above the tiles of any of the four buttons.

7. Pipes and appliances in 3D

   Where3D with the Water and heating tab open.

8. Appliances: towel rail, air curtain
9. Power outlets: section appliances in “Electrics”

   Wherethe Power outlets row in the section steps (appears when the floor has electric appliances of the section) → Place.

10. HVAC set