How to start a project
WhereMy projectsthe New project button or the Or start with a task row
Steps
- Click New project. The editor opens, and the New project window appears over it. You can also close it, and then the project opens empty.
- At the top of the window, type the name straight into the line that says You can type the project name here. If you leave it empty, the previous name stays.
- Next to it, choose Apartment or Private house; the default is apartment.
- Click the card for how to start. The click itself is the start, there is no separate button:
| Way | What happens |
|---|---|
| Upload a plan | the plan upload window: a photo or scan, and the neural network will read the walls (only images are accepted) |
| Draw it myself | the Plan tab, the panel: draw walls and rooms with clicks |
| Describe in words | the chat opens: write what layout you need, and the AI will draw it on the plan |
- Or, instead of New project, click a task in the Or start with a task row. The window will have the name and the building type, and instead of cards there is a Start button. The project opens where the task is solved:
| Task | What opens |
|---|---|
| the Plan tab and the plan upload window | |
| the Electrics tab, the section | |
| the Water and heating tab, water supply | |
| the Furnishing tab, kitchen | |
| the Water and heating tab, underfloor heating |
Buttons and keys
| What to press | What happens |
|---|---|
| Enterin the name | in a new project, go to the cards; from a task, Start |
| Esc, cross | close the window without answers |
| clickoutside the window | close the window while the name is empty; with a name typed in, the window stays |
What is important to know
- The calculations need the building type. In an apartment, only the walls with windows are external, heated neighbors are around, and water comes from the building's risers. In a house, all the walls along the edge are external, there is ground below, a roof above, and its own water inlet.
- The building type can be changed later in . The city, the apartment floor and the number of floors in the house are set in the heating calculation window; until a city is chosen, Moscow is used. House floors are added with the + button at the floor switch at the bottom of the screen.
- Without signing in, the project is kept as a draft in this browser, and Describe in words will draw a plan only after you sign in.
- If the plan limit is used up, a new project will not be created: the page will tell you how many projects the plan holds.