How the materials panel works
WhereFinishes tabany button in the left column
- Material search is in the panel header, as with the catalog on other tabs: it searches by card and group name. There is no section name in the header: you can see it from the button on the left. There are no description paragraphs above the cards either: the keys under their group tell you what to do with the selected card.
- Schedule and check card shows a floor preview: number of rooms, floor and wall areas, samples of the materials used, a section of the floor pie and the number of remarks. Click opens the calculation window.
- Part switcher is on : Wall, Lower walls, Reveals; on : and Ceiling; on : Floor, , Ceiling. Under the part name you can see what is currently selected in it.
- Cards are placed three in a row, with a picture of the material. Floors and walls are shown with our textures; waterproofing (roll, mastic, impregnation), insulation, screeds, plasters, skirting boards, cornice, molding and ceilings with drawings. The selected one is marked with a check mark; a click on it again clears the selection.
- Remove is in the group header: select it and click a room or wall, and the layer is removed.
- Parameters of the selected one unfold right under its group: type, tile or board, layout, thicknesses, heights; below are the tool keys.
Keys: room finishing
| What to press | What happens |
|---|---|
| Click | click: whole room |
| Esc | turn off the tool |