How to lay a floor covering
WhereFinishes tab
Steps
- Choose a covering: laminate, parquet board, piece parquet, quartz vinyl, tile and porcelain stoneware, linoleum, carpet, microcement, cork.
- Under the card, set the look (picture or color), the size of the tile or board, and the layout (see below).
- Click the room, and the covering will be laid over the whole floor.
- To lay a different covering on part of the floor (tiles by the entrance, a kitchen area), drag out a rectangle, and it will be trimmed to the walls. In the tool window on the right there is
Point by point for outlining the shape.
Buttons and keys
| What to press | What happens |
|---|---|
| Clickon a room | Covering over the whole floor of the room |
| Dragwith the mouse | A floor area as a rectangle trimmed to the walls |
| Esc | Turn off the tool |
| Remove in the group header, click on a room | Remove the covering of the room |
Keys: floor or ceiling layer
| What to press | What happens |
|---|---|
| Click | click: whole room |
| Drag | drag: area |
| Esc | turn off the tool |
What is important to know
- An area is cut out of the room's covering: laminate is counted without the tiles by the entrance. Clicking a room that has areas changes the covering of the room itself, and the areas stay.
- Areas of the same layer do not overlap each other. Underfloor heating under an area is allowed.
- The covering is checked against Table D.1 of SP 29: tiles in a bedroom or laminate in a bathroom will produce a remark.
- On the plan, the floor type number is placed in a triangle (GOST 21.501, cl. 5.5.1), and the area boundaries are dashed. The room mark goes around the areas.