How to fill a low spot with water
Where tabWater switch
Steps
- First make a hollow: Ground, Lower.
- Switch to Water and choose Fill.
- Click in the hollow. The water rises by one step (20 cm) and fills the hollow under the cursor.
- Each following click adds one more step. Light-blue rings show the depth.
Buttons and keys
| What to press | What happens |
|---|---|
| Click | one step of water with the selected tool |
| 1–3 | Fill, Drain, Drain |
| Ctrl+Z | undo the last click |
Good to know
- Drain lowers the water in this body of water by one step. Drain removes all the water from the body of water under the cursor; other bodies of water remain.
- Water does not rise above the overall level of the plot: the lawn will not be flooded. A shallow pit will not hold water.
- Water has no brush: size and strength have no effect.
- Ctrl+Z undoes a bucket click, and the next click does not bring back the undone water.